0102030405
Two-Story Lifting and Sliding Stereo Garage by China Suppliers and Factory - Efficient Car Storage Solution
Technical features of the equipment
The equipment occupies a small area and has high space utilization. The number of columns can be reasonably arranged according to user requirements.
Make full use of space to increase the number of parking lots several times.
Serialized and standardized design, reasonable structure, multiple protection devices, safe and reliable.
Flexible layout, convenient combination, and can adopt various types to form a large parking lot.
Low equipment cost and low maintenance cost.
Smooth operation, low noise, and convenient storage and retrieval.
All-round safety protection such as anti-falling, people and vehicles entering by mistake, vehicle over-length alarm, undervoltage and phase loss, overcurrent, power-off self-locking, emergency stop, etc.
Fully automatic PLC control, using buttons, IC cards, remote control and other control methods, simple operation.
Motor chain lifting drive system, balanced and reliable operation.
Freely selectable operation mode: button type, touch screen type, card swiping type.
High safety factor, the system has the following safety devices: anti-falling device, emergency stop button, over-limit operation prevention device, front photoelectric switch, over-height alarm device, etc.
Design parameters
Model |
Two-layer lifting and lateral movement type |
|
Vehicle size (L×W×H) |
5000mm×1850mm×1750/1550mm |
|
Vehicle weight |
≤2350kg |
|
Drive mode |
Motor chain drive |
|
Motor |
Lifting: 2.2kw lateral movement: 0.2kw |
|
Power supply |
Three-phase five-wire 380V/50HZ |
|
Speed |
Lifting: 4.2m/min lateral movement: 8m/min |
|
Control |
PLC logic automatic control |
|
Operation |
Key, IC card operation |
|
Safety devices |
● Warning device during operation | ● Anti-fall device |
| ● Emergency stop device | ● Up and down limit protection device | |
| ● Current overload protection | ● Transverse limit protection device | |
| ● Photoelectric detection device at the entrance | ● Up and down positioning switch | |
| ● Wheel stop bar | ● Power-off brake device | |
| ● Lateral positioning switch | ● Safety interlock device | |
| ● Chain protection cover | ● Excess length detection | |
Frequently Asked Questions
Q1: What are the primary space requirements for installing this parking system?
The system features a highly flexible layout with high space utilization. The number of columns can be customized based on your specific site requirements, allowing you to multiply your parking capacity within a limited footprint.
Q2: What is the maximum vehicle weight and size supported by the system?
The two-layer lifting and lateral movement system is designed to support vehicles with a maximum weight of ≤2350kg and dimensions up to 5000mm × 1850mm × 1750/1550mm (L×W×H).
Q3: How safe is the operation of this mechanical parking system?
Safety is a priority. The system is equipped with multiple protection devices, including anti-falling mechanisms, emergency stop buttons, up/down and lateral limit protection, photoelectric entry detectors, and over-height/over-length alarms.
Q4: What control options are available for operating the equipment?
The system uses fully automatic PLC logic control. Users can easily operate the equipment via multiple interface options, including push buttons, touch screens, and IC card swiping.
Q5: What are the electrical power supply requirements for installation?
The equipment requires a standard three-phase five-wire power supply of 380V at 50HZ to power the lifting motor (2.2kw) and the lateral movement motor (0.2kw).
Q6: How fast does the system lift and retrieve vehicles?
The system operates smoothly and quietly. The lifting speed is 4.2 meters per minute, and the lateral movement speed is 8.0 meters per minute, facilitating fast and convenient vehicle storage and retrieval.